|
|||
| Home | Cont@ct | Search | Sitemap | |
||
|
|
|
|
|
|||
|
|
|
|
 |
| Static mode This is the ideal measurement mode for vertical alignment. Measurement requires 3 or more of the 8 available measurement positions. |
 |
| Multipoint mode For shafts that are mounted on sleeve bearings. Measurement requires 3 points or more at any position over 60° rotation. |
 |
| Movement restrictions If you cannot move a machine foot any further, just switch to another “movable“ foot. No reason to stop aligning! |
 |
| Thermal growth Thermal growth at the feet and at the coupling can be input for both machines to take into account thermal changes. |
 |
| Coupling types What type of coupling is in use? By taking into account the type of coupling, you receive accurate alignment results for the coupling planes. |
 |
| InfiniRange-what for? In grossly misaligned machines, the detector measurement area may not reach out far enough. InfiniRange automatically extends the detector area to allow alignment of troublesome machines. |
 |
| Continuous sweep mode Readings are taken continuously during rotation. This mode is ideal for standard machines and requires a shaft rotation of as little as 60°. |
 |
| Live Move As the machine is adjusted in a horizontal or vertical direction, the display changes. |
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
