|
VIBNODE is a small monitoring system
which was specially developed for production-critical standard
machines:
- Motors
- Fans
- Pumps
- Roller bearings
- Simple gearings
Key features
- Economical entry-level solution with 6 or 12 channels
- Simple installation directly on the machine – lower installation
costs
- Standard interfaces– connection to Ethernet
- Easy operation with the proven OMNITREND
software
- Broadband and narrowband monitoring
- Masks out noise signals
- RPM-dependent tracking of frequency bands
- Intelligent data reduction
- Independent alarm generation
- On-site intelligence: complete signal processing in VIBNODE
Request further information
Economical entry-level solution
Individual machines are particularly
cost-effective to monitor with 6 or 12 channels. The number of channels
can be increased if required.
Decentralized – directly
on-site
VIBNODE is installed directly on the machine, does
not require a PC and is integrated in the company data network
(Ethernet, Modbus
TCP, OPC).
Quick installation
Short cable lengths, robust connection technology and ready-made
cables make VIBNODE quick to install.
Flexible measurement process
The recording of broadband overall values provides information
on the overall condition of the machine. On the other hand, the
selective monitoring of specific damage frequencies permits reliable
fault diagnosis. For variable RPM, the frequency bands are tracked.
The effect of interfering signals on the trend curve can be eliminated
by skillful selection of the frequency bands.
Spectrum only for alarms
To keep data traffic low, machine signals are only saved for
FFT or envelope analysis if an alarm occurs.
Prompt alarming
Maintenance personnel are informed independently of alarms
via Ethernet, eMail or SMS when threshold values are exceeded
|
